The power plant (engine with gearbox) is mounted on three supports with elastic rubber elements

The two front supports perceive the bulk of the power plant, and the rear support compensates for the torque from the transmission and the loads that are perceived when starting, accelerating and braking the car

How to replace the supports of the power plant of the Mazda 6

The main reason why the supports of the power plant are replaced is its damage or loss of elasticity, which increases the vibration transmitted to the car body from the power plant

Replacement of the right support

The support is attached with two nuts to the bracket on the cylinder block and three bolts to the body spar

How to replace the supports of the power plant of the Mazda 6

Removing the decorative engine cover, as described in previous articles

We install a reliable support under the engine or hang out the engine with a lifting mechanism

How to replace the supports of the power plant of the Mazda 6How to replace the supports of the power plant of the Mazda 6

Unscrew the bolt fastening the terminal to the support and pull aside the wire "mass"

How to replace the supports of the power plant of the Mazda 6How to replace the supports of the power plant of the Mazda 6

Unscrew the two mounting nuts of the bracket to the engine cylinder block

How to replace the supports of the power plant of the Mazda 6How to replace the supports of the power plant of the Mazda 6

Unscrew and remove the upper bolt together with the vibration damper

Removing the bracket

How to replace the supports of the power plant of the Mazda 6How to replace the supports of the power plant of the Mazda 6

Unscrew the three mounting bolts and remove the right support of the power plant

Installing the right support in reverse order

Replacement of the left support of the power plant

Removing the battery

Removing the air filter

We install a reliable support under the gearbox crankcase or hang out the power plant with a lifting mechanism

How to replace the supports of the power plant of the Mazda 6How to replace the supports of the power plant of the Mazda 6

Unscrew the bolt securing the left engine suspension support to the bracket and remove the bolt

Unscrew the two side mounting bolts

How to replace the supports of the power plant of the Mazda 6How to replace the supports of the power plant of the Mazda 6

Unscrew the two upper bolts securing the left support of the power plant to the body spar

And remove the left support

Install the left support and all the removed parts in reverse order

Replacement of the rear support of the power plant

The support is attached to the bracket on the gearbox and to the front suspension subframe

We install a reliable support under the gearbox crankcase or hang out the power unit with a lifting mechanism

How to replace the supports of the power plant of the Mazda 6How to replace the supports of the power plant of the Mazda 6

With two keys on 17, unscrew and remove the support mounting bolt to the gearbox crankcase

Unscrew the support mounting bolt to the front suspension subframe and remove the support

Installing the rear suspension support of the power plant in reverse order